Trex track results......BAD
#1
Trex track results......BAD
Probably something that none of you want to hear, but here we go anyways. I went to the track to test out my new Trex Cam yesterday. Well it did not go over very well. My first run, I launched at 3500 big mistake car bogged and almost died at the line. Ran a 13.1 on a 2.6 60 foot. 2nd run launched at 5000 lifted the wheels an inch and then bogged but not bad 1.8 60 foot ran a 12.1 @ 115.
Mods at the track Mt et radials 16’s and everything in the sig the tires were brand new and I had never launched on them before.
Now for the horrific part. I went for my 3rd run of the day. I get to the line and decided I am going launch at 6 and see what happens. Figured I would rather spin then bog. Well I did neither I snapped my Iron 3rd member in half. I am not kidding. I will have someone post picture so you can see what I am talking about. So looks like the car will be down for a while.
So much for 9"'s being industructable
Mods at the track Mt et radials 16’s and everything in the sig the tires were brand new and I had never launched on them before.
Now for the horrific part. I went for my 3rd run of the day. I get to the line and decided I am going launch at 6 and see what happens. Figured I would rather spin then bog. Well I did neither I snapped my Iron 3rd member in half. I am not kidding. I will have someone post picture so you can see what I am talking about. So looks like the car will be down for a while.
So much for 9"'s being industructable
#7
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sevanseriesta
Now for the horrific part. I went for my 3rd run of the day. I get to the line and decided I am going launch at 6 and see what happens. Figured I would rather spin then bog. Well I did neither I snapped my Iron 3rd member in half. I am not kidding. I will have someone post picture so you can see what I am talking about. So looks like the car will be down for a while.
So much for 9"'s being industructable
Trending Topics
#9
12 Second Club
iTrader: (7)
Join Date: Mar 2003
Location: Allen, MI
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
I busted my friend's 9 inch housing also. This is with his AFR 195 cc, 233/239, stock bottom LT1. The front of the housing snapped right off!! We thought they were indestructable too. I want to see how bad yours looks. I did his on the street shifting to second at about 7100 rpm.
#12
12 Second Club
iTrader: (7)
Join Date: Mar 2003
Location: Allen, MI
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Turo
Damn, you guys are putting some serious abuse on those 9" rears to snap them like that! That, or they might have been improperly set up.