Quick question that you may not have thought of....
04-03-2005, 05:20 PM
#1
Banned
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Springfield Mo
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Quick question that you may not have thought of.... Has anyone used a modefied 4L60E dipstick in a TH350 for a fbody swap?
can it be done, has it been tried?
can it be done, has it been tried?
04-04-2005, 05:35 PM
#4
I've done it, it's a pain in the *** because of the difference between the hole location and bellhousing bolt, they're different between the two transmissions.
It can be done, I've done it, I also refuse to put a trans dipstick in without the tab being bolted in place so I've removed that and welded back before.
Whats really nice is if you have access to a gear driven refrigerant tubing bender for that size pipe.
Now I've never done this on a fourth gen camaro, I can see it could be more difficult on these cars.
It can be done, I've done it, I also refuse to put a trans dipstick in without the tab being bolted in place so I've removed that and welded back before.
Whats really nice is if you have access to a gear driven refrigerant tubing bender for that size pipe.
Now I've never done this on a fourth gen camaro, I can see it could be more difficult on these cars.