Recommended PSI on BFG DR's
#1
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Recommended PSI on BFG DR's
What PSI do you guys recommend running my BFG DR's at? I haven't ran them at the track yet (brand new) and heard other guys running 14-15psi. That sounds pretty low to me, not sure though.
#3
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99transamls1
at the track i run mine 15psi, on the street 32psi.
#4
Sometimes with the short sidewall if the psi is too low they could cup in the middle and actually decrease your contact patch. I would start with around 22psi and work your way down to 16psi if needed. Anything lower than that you'll just have to see if they're gonna work. I do about a 5-7 second burnout, get them nice and sticky.
#5
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tektrans
Sometimes with the short sidewall if the psi is too low they could cup in the middle and actually decrease your contact patch. I would start with around 22psi and work your way down to 16psi if needed. Anything lower than that you'll just have to see if they're gonna work. I do about a 5-7 second burnout, get them nice and sticky.