Where in edit to change max line pressure?
06-15-2005, 08:28 AM
#1
TECH Senior Member
Thread Starter
Join Date: Nov 2001
Posts: 10,341
Likes: 0
Received 0 Likes
on
0 Posts
Where in edit to change max line pressure? Hi guys,
Where in edit do I change the max line pressure from 90 to 95%?
I Am going to set my max line pressure at 95% and use the following base shift pressure setting:
Base shift pressure settings:
0 15 20 20 20 25 25 29 32 35 39 42 50 52 55 58 63 67 70 74 79 83 86 90 93 96 96 96 96 96 96 96 96
0 24 29 30 32 37 41 45 48 53 56 60 62 65 69 74 77 81 85 88 91 95 96 96 96 96 96 96 96 96 96 96 96
0 24 29 32 35 41 44 47 50 53 56 61 65 67 70 74 77 81 85 88 91 95 96 96 96 96 96 96 96 96 96 96 96
Going to use the stock force motor current table.
Where in edit do I change the max line pressure from 90 to 95%?
I Am going to set my max line pressure at 95% and use the following base shift pressure setting:
Base shift pressure settings:
0 15 20 20 20 25 25 29 32 35 39 42 50 52 55 58 63 67 70 74 79 83 86 90 93 96 96 96 96 96 96 96 96
0 24 29 30 32 37 41 45 48 53 56 60 62 65 69 74 77 81 85 88 91 95 96 96 96 96 96 96 96 96 96 96 96
0 24 29 32 35 41 44 47 50 53 56 61 65 67 70 74 77 81 85 88 91 95 96 96 96 96 96 96 96 96 96 96 96
Going to use the stock force motor current table.
