PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

SES, Low Maf signal and Random Miss

Thread Tools
 
Search this Thread
 
Old 06-15-2005, 10:35 AM
  #1  
Staging Lane
Thread Starter
 
MW2 Performance's Avatar
 
Join Date: Jun 2005
Location: Burbank, CA
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Question SES, Low Maf signal and Random Miss

Hey I just picked up a 98 formula ws6, when I got it no ses light, had it for a couple days now and on monday morning when I started to let it warm up, I came back out to the car and the ses light was on, no big deal so I drove to work and plugged in the scanner, cant remember the code numbers but I'll get them in a couple of hours, and it showed up as low maf signal and a random missfire. cleared the codes (had to pass smog) and yesturday evening when idling at a long light the light popped back on. I remember when flippin through the engine specs at idle one of the o2 sensors was stuck at 204 and not movin, but the others were like 700-800 (i think).
Anyone have any throughput on this? Thanks in advance!

-Mark
Old 06-15-2005, 11:23 AM
  #2  
TECH Senior Member
iTrader: (33)
 
WS6FirebirdTA00's Avatar
 
Join Date: Mar 2003
Location: North Carolina
Posts: 8,318
Likes: 0
Received 1 Like on 1 Post

Default

if the maf is bad it could cause misfire
Old 06-15-2005, 01:27 PM
  #3  
Staging Lane
Thread Starter
 
MW2 Performance's Avatar
 
Join Date: Jun 2005
Location: Burbank, CA
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Default

think it would have any affect on that o2 sensor?
Old 06-15-2005, 01:30 PM
  #4  
Staging Lane
Thread Starter
 
MW2 Performance's Avatar
 
Join Date: Jun 2005
Location: Burbank, CA
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Default

I mean that o2 being stuck in 1 spot*




All times are GMT -5. The time now is 11:46 AM.