please help vig 3600 w/ 150 shot
#1
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Nov 2004
Location: J'ville, NC
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
please help vig 3600 w/ 150 shot
Here goes I bought the car with everything but the n2o. It had a vig 3600 and a FLP stage 4. Dynoed it in March N/A was 325/303 with a 75 wet shot i got 395/407. best time was a 11.68@116 w/ a 75 shot 1.66 60ft. Ok the trans went out and I had it rebiult and sent the stall back to PI to have it checked (everything was good according to PI) when i took it back to the dyno in June i got 320/288 and 401/371 w/ 100 shot and then i out the 150 shot on it and got 425 with no torque reading. The guy running the dyno said that me trans was shot I told him that it was just rebiult and then he said the stall was shot, I told him I just got it back from PI. So then he said my tires were slipping, so we let out some air and the same thing. I took it to the track and ran a 11.62@116 w/ 150 shot and a 60 ft 1.8.
Thats the story. All my friends say the stall is to loose. Am I reading to much into the numbers? Is the 150 shot to much for a Vig3600? Anyone ever have or seen this before?
Sorry for the long post but I wanted all the info out there. Thanks in advance.
Thats the story. All my friends say the stall is to loose. Am I reading to much into the numbers? Is the 150 shot to much for a Vig3600? Anyone ever have or seen this before?
Sorry for the long post but I wanted all the info out there. Thanks in advance.