98Z28 stock to New LS1/w LS6 heads AND CAM
#1
Teching In
Thread Starter
Join Date: Aug 2005
Location: VA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
98Z28 stock to New LS1/w LS6 heads AND CAM
I am Looking to replace my stock 98 Z28 with a new LS1 and possibly modify it with heads and a cam(LS6). I was interested in putting in the LS2 but their seems to be much conflicting information about the application(ECM, drive by wire and other wireharness problems) I have ordered the application guide from GM and from my current reasearch the swap should be strraight foward for the LS1, the LS2 on the other hand, I will waite for the Guide.
I also have not been recieved well by shops for this work. I have been told several times that they are not interested.
I Live near DC in northern VA.
Any help or information will be appreciated.
thanks,
I also have not been recieved well by shops for this work. I have been told several times that they are not interested.
I Live near DC in northern VA.
Any help or information will be appreciated.
thanks,