Ryan K ? for you
09-09-2005, 01:05 PM
#1
Launching!
Thread Starter
Join Date: Feb 2004
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Ryan K ? for you Ryan,
I saw on another board that you have installed a B&M shifter in your GTO. I got one this week and wondered if you had any tips or suggestions before I get stranded part way through an install.
I saw on another board that you have installed a B&M shifter in your GTO. I got one this week and wondered if you had any tips or suggestions before I get stranded part way through an install.
09-09-2005, 09:37 PM
#2
Ya man, I installed it last friday. Its F'ing sweet. The install is pretty easy. There is a very good write up on LS1GTO.com. I used the washer trick, just enough to space the shifter to keep the gasket from crushing. Other than that, use lock-tight!
Ryan
Ryan
09-09-2005, 11:34 PM
#3
TECH Addict
Join Date: May 2004
Location: Bellingham/Edmonds, WA
Posts: 2,564
Likes: 0
Received 0 Likes
on
0 Posts
Do the B&M have stop bolts like the Pro 5.0? If so be sure to really tighten the jam nuts down once you have the bolts in the right position. Mine losened up once and for about 2 blocks everyone thought I didn't know how to drive my car because it kept popping out of second..