Wiring, Stereo & Electronics Audio Components | Radars | Alarms - and things that spark when they shouldn't

Corvette dual climate control in an f-body

Thread Tools
 
Search this Thread
 
Old 09-26-2005, 02:11 PM
  #1  
On The Tree
Thread Starter
iTrader: (1)
 
JarrettL's Avatar
 
Join Date: Aug 2005
Location: College Station, TX
Posts: 109
Likes: 0
Received 0 Likes on 0 Posts
Default Corvette dual climate control in an f-body

I did a search on this and the most recent information I had found was from May of 2003 and it wasn't conclusive so I'll ask again. Does anyone know of any existing conversions of the Corvette's dual climate control into an F-body or if this conversion can be done? I don't really even care if the passenger side function worked. I just think it looks pretty cool.
Old 09-26-2005, 05:24 PM
  #2  
11 Second Club
iTrader: (103)
 
Duffster's Avatar
 
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like on 1 Post

Default

Asking SAME QUESTION on another board. . .

http://www.ls1.com/forums/showthread.php?t=3327
Old 09-27-2005, 10:28 PM
  #3  
On The Tree
Thread Starter
iTrader: (1)
 
JarrettL's Avatar
 
Join Date: Aug 2005
Location: College Station, TX
Posts: 109
Likes: 0
Received 0 Likes on 0 Posts
Default

To the top...someone has to know. Come on LS1_SS, you should know.

Last edited by JarrettL; 09-27-2005 at 10:41 PM.
Old 10-30-2005, 12:14 AM
  #4  
11 Second Club
iTrader: (103)
 
Duffster's Avatar
 
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like on 1 Post

Default

Buehler? ? ?
Old 10-30-2005, 11:04 AM
  #5  
TECH Addict
iTrader: (14)
 
GR33N GoblinM6's Avatar
 
Join Date: Jan 2005
Location: Utah
Posts: 2,301
Likes: 0
Received 1 Like on 1 Post

Default

you'll need to separate the ducting in the dash to a left and right side for starters.. as far as the wiring goes.. that will also have to be split.. as well as vacuum doors for left and right so one and bring in cold air and the other hot air if needed.. big job..




All times are GMT -5. The time now is 08:43 PM.