Aem
10-10-2005, 03:37 PM
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Arizona
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Aem Will the AEM WB O2 controllers out put work with the HPTuners so I can data log AFR. Also does anybody know the wire hookup on the hp e/io and aem. Thanks
10-10-2005, 04:26 PM
#3
TECH Senior Member
if it has 0-5 volt output it should work... the wires are in the help file under "Connecting to Vehicle"
May want to look into an LC-1 also... I belive it's around the same price and I think dynotune.org has a sale going on right now? if not they offer great prices on them
May want to look into an LC-1 also... I belive it's around the same price and I think dynotune.org has a sale going on right now? if not they offer great prices on them
10-12-2005, 03:17 PM
#4
Teching In
Join Date: Sep 2005
Location: SoCal
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
The 30-230X series controllers have 0-5V and 0-1V outputs.
The 30-4XXX series gauge type controllers can be set for 0-5V, 1-2V, or two different 0-1V outputs. The two 0-1V have different calibration curves, one straight line and one that emulates a stock narrowband's curve. (Nernst Emulation)
If the Hptuners can read in a 0-5V or 0-1V signal, which I'm guessing it can, then any of our UEGO controllers should work for you.
-MP
The 30-4XXX series gauge type controllers can be set for 0-5V, 1-2V, or two different 0-1V outputs. The two 0-1V have different calibration curves, one straight line and one that emulates a stock narrowband's curve. (Nernst Emulation)
If the Hptuners can read in a 0-5V or 0-1V signal, which I'm guessing it can, then any of our UEGO controllers should work for you.
-MP