What Do You Think About SHAFIROFF ?
11-16-2005, 06:10 PM
#1
11 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
What Do You Think About SHAFIROFF ? SHAFIROFF RACING ENGINES
Im thinking about buying this for a project car
New LS1/LS6 Style Aluminum Block
4340 Eagle Internally Balanced 4" Stroke Forged Steel Crank
4340 Callies "Comp Star" (LS1 Specific) 6.125 H-Beam Rods with ARP 2000 Rod Bolts
Mahle 10.7 CR Coated Forged Pistons
(9.0 CR Coated Forged Pistons for "Power Adder" Combos) MY CHOICE
Clevite 77 "H" Series Bearings
Line Honed with ARP Stud Kit
Square Decked and Plate Honed
Precision machined on our state-of-the-art CNC equipment and assembled by the most experienced street & race engine builders in the world.
Im thinking about buying this for a project car
New LS1/LS6 Style Aluminum Block
4340 Eagle Internally Balanced 4" Stroke Forged Steel Crank
4340 Callies "Comp Star" (LS1 Specific) 6.125 H-Beam Rods with ARP 2000 Rod Bolts
Mahle 10.7 CR Coated Forged Pistons
(9.0 CR Coated Forged Pistons for "Power Adder" Combos) MY CHOICE
Clevite 77 "H" Series Bearings
Line Honed with ARP Stud Kit
Square Decked and Plate Honed
Precision machined on our state-of-the-art CNC equipment and assembled by the most experienced street & race engine builders in the world.
11-16-2005, 10:29 PM
#2
Staging Lane
iTrader: (4)
Join Date: Aug 2005
Location: Mississippi
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Shafiroff is one of the best engine builders for small and big block chevy. I didn't know they were into Gen III stuff. But it's bound to be good............ and $$.
11-18-2005, 06:00 AM
#3
Launching!
Join Date: May 2005
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
i bought a pro-series 555 from them that makes 950hp, about 3 years ago, pumped a ton of nitrous through it with RP racing 21, it made it until the end of this season before it finally spun a bearing. sometimes it seems like the engine was put together in a hurry, all in all it's been excellent. the only prob i ever had was when i took the pan off that came on the motor (wouldn't fit in the car) i noticed a huge glob of rtv/gasket material sucked onto the pan sump. yikes!
