Compression Ratio!!?????
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Mar 2004
Location: Fairfax, VA
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
Compression Ratio!!?????
I'm trying to figure out what my exact CR is with my new motor setup!! Is there a formula that i can use to find this out? I have Stock CC LS1 heads on a 3.903 bore. The pistons I used are -30cc's with a 4.000 stroke and 6.125 rod length. Thanks for any help you offer.
Nick
Nick
#4
Banned
iTrader: (8)
Join Date: Jan 2004
Location: Western New York
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01Blackerado
I'm trying to figure out what my exact CR is with my new motor setup!! Is there a formula that i can use to find this out? I have Stock CC LS1 heads on a 3.903 bore. The pistons I used are -30cc's with a 4.000 stroke and 6.125 rod length. Thanks for any help you offer.
Nick
Nick
That is figuring 66cc chamber heads, .051" COT gasket 3.910 gasket bore and a piston .010 out of the hole. You really need to use exact figures to get more accurate, but my figure is close