FS: Block, Manley Rods, Crank, ls2 intake, Injectors, C5 headers. ECT
#1
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Nov 2003
Location: HTOWN
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
FS: Block, Manley Rods, Crank, ls2 intake, Injectors, C5 headers. ECT
I have a stock ls1 block with less then a 100 mile's in perfect shape, ready to be built. $350 will not ship
I also have the stock crank that was in the block listed ^, which has the same amount of miles and is in perfect shape. $175 will not ship
I have a set of Manley rods with less then a 1k miles, The Rods are Manley H-Beam connecting rods with pins. They are 6.100" in length. $400 + shipping
OR you can get the Block rods and crank for $900 this is every thing expect pistons, rings, and bearings for a forgded bottem end.
I also have a set of breathless 1 3/4 stepped to 1 7/8 headers for a 01- 04 corvette. SOLD!
Ls2 intake only 1k miles I gain 10 rwhp over my ls6 on my cam only car. Sold!
30lb SVO injectors 2k miles Sold!
Thanks,
Matt
I also have the stock crank that was in the block listed ^, which has the same amount of miles and is in perfect shape. $175 will not ship
I have a set of Manley rods with less then a 1k miles, The Rods are Manley H-Beam connecting rods with pins. They are 6.100" in length. $400 + shipping
OR you can get the Block rods and crank for $900 this is every thing expect pistons, rings, and bearings for a forgded bottem end.
I also have a set of breathless 1 3/4 stepped to 1 7/8 headers for a 01- 04 corvette. SOLD!
Ls2 intake only 1k miles I gain 10 rwhp over my ls6 on my cam only car. Sold!
30lb SVO injectors 2k miles Sold!
Thanks,
Matt
Last edited by NVR4GET; 12-23-2005 at 12:24 PM.
#7
TECH Fanatic
iTrader: (12)
Join Date: Jan 2004
Location: Houston, TX
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Matt, would you happen to have the alternator mounting bracket? I am really only looking for the rear support bracket (the smaller one on the backside of the alternator), if you can help I'd appreciate it, thanks!