ehirst83

iTrader: (5)

So when I did my head and cam swap I broke a chunk off my stock pulley getting it off. I finally got my underdrive pulley and I'm wondering if I have to pull my radiator out again (will be the third time in 4 months) to replace my pulley or can I get it off just pulling the fans off. Any input would be great.

Thanks,

Clair

LS1Quickeee

I used a three prong puller. I pulled off the original and swapped in a asp pulley without removing the fans or radiator. It is a tight fit with the fans in there but deffinetly doable.

WILWAXU

iTrader: (6)

should be plenty of room to do it without removing it. Worst case (I've never had to) you could just remove the fans.