JR HAWK 9

iTrader: (3)

I am thinking about going with a set of iForged 18x11 rears and 18x9.5 fronts, but I want to MAKE SURE I won't have any rubbing problems with the fender lips or anywhere else before I do. So, all of you with 18x11 rears, how do they fit?? It seems like iForged doesn't like to release their offset specs, so I am wondering how their rims fit and what they consider to "fit".

I would rather go with a narrower rim that have to cut up or roll my fender lips.

So, how do your 11" wide rims fit in the rear??

thanks,
Paul

ulySSes

Mine fit fine. You WILL have to roll your fenders, though. Its no big deal.

JR HAWK 9

iTrader: (3)

even if I go with a 295/30/18 rear tire?? I also have those bump stop spacers which limit my rear end travel significantly.

I would go 295/30/18 rear and 265/35/18 front....as I prefer smaller sidewalls. I am currently running 265/35/18's on my ZO6 rims and like them.

MeentSS02

iTrader: (11)

You will have to roll the fender even with a 295 tire on an 11 inch rim. You'll also most likely be doing some work in the bump stop area as the corners will contact the inside of the rims under certain conditions.

JR HAWK 9

iTrader: (3)

how about a 10.5" or 10" wide rim.....same thing??

MeentSS02

iTrader: (11)

It depends on the dimensions they use...I'd think the 10.5" would work as far as not having to mess with the bump stop mounts. I think you'd still have to roll the fenders though.