Cam card specs on XE230/236-112
03-25-2006, 07:46 PM
#1
TECH Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
Cam card specs on XE230/236-112 Anyone have their cam card handy? I lost mine (been a couple years). Was wanting to know the exact IVO/IVC EVO/EVC event timings, all the numbers...
It's the cam from Thunder Racing, the CC-XE230/236 on a 112.
It's the cam from Thunder Racing, the CC-XE230/236 on a 112.
03-25-2006, 09:35 PM
#2
I know you asked for the 112, but it is ground + 2
http://compcams.com/Technical/Search...umber=08-432-8
http://compcams.com/Technical/Search...umber=08-432-8
03-26-2006, 12:01 PM
#3
TECH Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the link. 
Too bad they don't publish the numbers at .050 though
Was hoping to get those.
I've got the calculated @ .050 IVO/IVC events but just wanted to make sure my calcs were correct. According to DesktopDyno, I should install it at 4 degrees retarded. Should make a really nice daily driver style cam for my 383.
I'll have to spend some time with the degree wheel to get it all figured out, I suppose.
Too bad they don't publish the numbers at .050 though
Was hoping to get those.I've got the calculated @ .050 IVO/IVC events but just wanted to make sure my calcs were correct. According to DesktopDyno, I should install it at 4 degrees retarded. Should make a really nice daily driver style cam for my 383.
I'll have to spend some time with the degree wheel to get it all figured out, I suppose.