99 formy, stock

Thread Tools
 
Search this Thread
 
Old 04-06-2006, 11:57 AM
  #1  
JDP
TECH Fanatic
Thread Starter
iTrader: (21)
 
JDP's Avatar
 
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 1 Like on 1 Post
Default 99 formy, stock

i went to milan dragway yesterday with my bird for the first time

bone stock 99 6 speed.

best was 13.3362 at 106.58 with 2.23 60ft

2nd best 13.3799 at 106.39 with 2.29 60ft

3rd best 13.39 at 107.17 with 2.30 60ft

no matter how i launched i couldnt hook, i would slip the clutch a lot and when the clutch was fully engaged the tires would spin and if i just eased the clutch out at around 1300rpms and would ease on it the tires would just break loose when i finally floored it

i think i need some suspension mods because every time i hit a gear the back end would sway a little bit, and my traction problems are abvious i need to do something.

but im happy for how the car ran for being a 99 non ws6 car and going that quick with that shitty of a 60ft.

here is the vid
http://videos.mistreetscene.org/vide...E6257CCEF3.htm
Old 04-06-2006, 12:32 PM
  #2  
12 Second Club
iTrader: (5)
 
slvrhwk's Avatar
 
Join Date: May 2004
Location: Chatsworth Ga
Posts: 330
Likes: 0
Received 0 Likes on 0 Posts

Default

Nice runs!

Get that 60ft down and you'll be in the 12's
Old 04-06-2006, 10:43 PM
  #3  
7 Second Club
iTrader: (5)
 
Villain281H's Avatar
 
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like on 1 Post

Default

Damn good IMHO. Practice launching and getting that 60 foot down in the 2.0 range and 12s will happen!

Good luck!

Derek
Old 04-06-2006, 10:49 PM
  #4  
JDP
TECH Fanatic
Thread Starter
iTrader: (21)
 
JDP's Avatar
 
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Villain281H
Damn good IMHO. Practice launching and getting that 60 foot down in the 2.0 range and 12s will happen!

Good luck!

Derek
i never had launching problems in my mustang but these biatches got some torque.

i dont know what else to do, ive tried easing the clutch out at nearly idle, started going then when i hit like 2500 rpms they just start to spin
Old 04-07-2006, 03:29 PM
  #5  
TECH Junkie
 
BlueSix's Avatar
 
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Likes: 0
Received 0 Likes on 0 Posts

Default

Get a drag radial and slip the clutch at 4000




All times are GMT -5. The time now is 03:49 AM.