ram-it

I will be getting the LS7 clutch. What part do I need for the quick clutch fluid drain? In order to make sure I get all the right parts can you give me a shopping list? I also need your number.

Thanks!

I hope this did not violate any form rules.

ram-it

Here are the GM parts that I am looking at. Anything I should add? http://forums.corvetteforum.com/show....php?t=1363214

TwoFast4Lv

iTrader: (8)

shoot me a call

98ls1/87vortectpi

not to just jump in here, i would like to have some work done as well; can you pm me your number i cant seem to find it anywhere.. thanks

pro1955

I just did mine, you need the clutch set up with flywheel, you already have the master and slave cyls. Be sure to install a remote bleeder hose, bought mine from LAPD, I checked the balance of my clutch it was off 25 grams. I installed DTE strut brace and tunnel plate just because thats the time to do it, I have done several holeshots, gear slams no problems with sticking clutch pedal, slipping ect. will take to track soon.

ram-it

Ellis, I bought the LS7 clutch kit plus the Z06 slave and master cylinders, pilot bearing and remote bleeder. Stuff is shipping regular ground and will be here next week. Will call you as soon as I get it.