need help with body work..
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Mar 2004
Location: Phoenix, AZ
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
need help with body work..
hey guys i got a new rear bumper the other day but its going to be repainted. i figured i could save some bux if i do the prep work myself. so my question is, how do i take this rear bumper down to nothing? what grit sand paper? do i wet sand? thanks guys!
#3
TECH Addict
iTrader: (10)
Join Date: Aug 2005
Location: Seminole County, Florida
Posts: 2,803
Likes: 0
Received 1 Like
on
1 Post
um if it was off of another car all you have to do is. .
1. take some shop quality wax and grease remover and wipe it down really good.
2. scuff the whole thing with 320 grit, you only need to scuff it, not sand it all down, just make sure you take ALL the glossy look off.
3. wipe down with wax and grease remover again, and dont touch it with bare hands after that. (or get armor-all within a mile of it)
1. take some shop quality wax and grease remover and wipe it down really good.
2. scuff the whole thing with 320 grit, you only need to scuff it, not sand it all down, just make sure you take ALL the glossy look off.
3. wipe down with wax and grease remover again, and dont touch it with bare hands after that. (or get armor-all within a mile of it)