Serious Wastegate Help...am i mising something?
#1
Serious Wastegate Help...am i mising something?
Take a look at these pics and see if you notice something...the valve in the wastegate looks like its 1/16" smaller than the body...ie air is coming out of it at idle when the car runs and it looks like theres no way it'd make boost cause of the space.Help
#3
TECH Apprentice
iTrader: (6)
Join Date: Nov 2003
Location: Bastrop , TEXAS
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tiago
if it is a TIAL valve, you're missing the valve seat. Its a little ring piece that gets sandwiched between the valve and the mounting flange to seal that gap...
#5
TECH Addict
iTrader: (4)
Join Date: Sep 2002
Location: Boise, ID
Posts: 2,542
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by y2khawk
Looks like a turbosmart?? Maybe a Tial 44?
The valve seat is usually part of the weld flange for the pipe. The tial 38's have an insert, and the 46's have an extra flange that goes in between the gate and the weld flange. Not sure on the 44's, never played with one.
The valve seat is usually part of the weld flange for the pipe. The tial 38's have an insert, and the 46's have an extra flange that goes in between the gate and the weld flange. Not sure on the 44's, never played with one.