F14 Cam only A4 results.
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: Earth, I hope...
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
F14 Cam only A4 results.
Got the car finally tuned. Car was tuned by NicD in AZ. He was highly recommend and I myself recommend him too. He did a good job, car drives like stock now. No more issues with the a/c on or anything. I'm happy with the overall performance of the car. Now the results:
Max Power=355.77 Max Torque=340.79
Unlocked through a tight converter and 4.10s. Stock 10spk SS wheels. My cam is ground on a 112Lsa and peaked right at 6-6200rpms. This was on a Dyno Jet with smoothing and correction factor. Thats what I have.
Ski
Max Power=355.77 Max Torque=340.79
Unlocked through a tight converter and 4.10s. Stock 10spk SS wheels. My cam is ground on a 112Lsa and peaked right at 6-6200rpms. This was on a Dyno Jet with smoothing and correction factor. Thats what I have.
Ski
#5
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: Earth, I hope...
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
SVTThis: The reason I went with the off the shelf cam, was my stock lifters crapped on me and took out my stock cam. Needed to rebuild on a budget and got this cam for cheap. So, I used it. Now that money is better I will be changing cams, but i'm leaving for a 6+ month deployment in 2months. I've had this cam in since Nov. 05.
Everyone else. I have full bolt ons -pulley, full suspension setup with stock springs and decarbons.
Ski
Everyone else. I have full bolt ons -pulley, full suspension setup with stock springs and decarbons.
Ski