Where to get muffler bushings?
01-19-2003, 11:26 AM
#1
TECH Enthusiast
Thread Starter
Join Date: Jan 2002
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Where to get muffler bushings? The bushings that keep my muffler in the air, i want to replace my stockers and get something tighter, so i won't scrape my maffler.
Thanks <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Thanks <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
01-19-2003, 11:56 AM
#2
10 Second Club
iTrader: (8)
Join Date: Nov 2001
Location: NW Indiana
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get muffler bushings? are you talking about isolators? If so, I don't believe there are aftermarket ones. The factory ones will stretch after time and a new one from the dealer will be pretty tight. If I recall correctly, there like $8.
Steve
Steve
01-19-2003, 06:49 PM
#4
TECH Enthusiast
Thread Starter
Join Date: Jan 2002
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get muffler bushings? well, yeah, here the pic of what i'm talking about
It's located on the driver side of the car, next to the muffler
<img src="http://antotrade.dnsalias.com/P1010027.JPG" alt=" - " />
It's located on the driver side of the car, next to the muffler
<img src="http://antotrade.dnsalias.com/P1010027.JPG" alt=" - " />
01-20-2003, 09:02 AM
#7
TECH Veteran
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get muffler bushings? ...after you find the muffler bearings, please tell me how to fix my intake welds....
....I saw the movie, The Fast and Furious, recently. They were street racing their ricers and some guy fed his ricer too much NOS. The floor board came off during the race and the intake welds on the 4-banger were blown...
...my machanic friend told me our LS1 intake welds are plastic. Apparently, they are very costly to re-weld...
....I saw the movie, The Fast and Furious, recently. They were street racing their ricers and some guy fed his ricer too much NOS. The floor board came off during the race and the intake welds on the 4-banger were blown...
...my machanic friend told me our LS1 intake welds are plastic. Apparently, they are very costly to re-weld...
