treysoucie

iTrader: (4)

any1 know n e shops in NW houston area, that do good work, and are decently priced? i want to have a shop i can rely on, and wont rape me (price wise)

thanks,
trey

charlie c5

iTrader: (6)

What kind of work you looking for? I do Nitrous!!!!

treysoucie

iTrader: (4)

good pcm tuner, someone good with fbody's... i will be taking it there for performance upgrades, and maintenance (whatever i cant do here at home).

trey

Rob Valden

try HPE , good staff, and not overly priced. Chuck also does alot of tuning and makes power.

Rob

Angus

iTrader: (2)

Sometimes a bit of a drive is worth it. G Force and Icon Autosports are also great shops. I have been to both and have had close friends with their Sevan Series T/A, Firehawk T/A and Silverado go to these places also.

Nine Ball

iTrader: (38)

Also, keep in mind that cheaper isn't always better. Sometimes you really do get what you pay for. The cost of being cheap in the world of hotrodding usually means having to end up paying double to repair/replace the cheap stuff later on.

2001SSBOY

iTrader: (1)

hey where are these places located? i need a place to take my 01 SS..just moved out to spring area a few months ago. Looking to drop a cam, headers and upgrade the slp exhaust, any suggestions? i took all my previous cars to Ripleys and always had good workmenship there...thanks

Nine Ball

iTrader: (38)

Icon: SW Houston near Sugarland
HPE: NW Houston inside beltway
MTI: W Houston south of I-10 outside beltway
G-Force: S Houston in Pearland
Conleys: N Houston off FM 1960

2001SSBOY

iTrader: (1)

thanks..definetly check them out

88GT&69ss

Maybe this will help. I have had an 03 Cobra and a 89 Fox Body coupe Drag Radial Car with a hair dryer. My son has a 88gt with a hair dryer and a 2002 Formula. All tuned at Conley's Performance PlUS. If it is a GM they have the ability to tune with HP Tuners all Gen III and Gen IV vehicles and also 1, 2, and 3 Bar Map for boosted applications. Lawrence Conley also is an experienced tuner on a vaiety of "Stand Alones" Gen 7, FAST, BIG STUFF 3, ANDERSON PMS. Full service shop. Located 4 .5 miles east of !-45 on FM 1960. Only 4-5 miles from Humble. Hope you find what you are looking for LOL.

Angus

iTrader: (2)

Conley Performance did the install on my LS6 engine.

Urban Legend

iTrader: (5)

HPE or G force.

allngn_c5

iTrader: (3)

Take a road trip to Wiley and go visit LG Motorsports. Talk to Bobby and tell him I sent you. I guarantee he won't rape you, unless that's your thing. J/K
In all seriousness, he will help you out with whatever you are trying to do.
They are all good guys at LG. I wouldn't have drove from Michigan to Texas if I wasn't getting a better deal then what I could do in my home state. 1-972-429-1963
and ask for Bobby. Good luck.

ESR

iTrader: (7)

Trey give Jeff a call if you have not found a shop already. Conleys 281-540-3278

ZL1SS

iTrader: (4)

My vote is for ICON AUTOSPORTS!!

CRAGER

MTI gets my vote, I would never go anywhere else. I've been going there about 6 or so years now, they rock!


Peace,
Craig.

slowpoke96z28

iTrader: (2)

i've dealt with LG Motorsports, MTI, HPE, and Conley's in regards to installs. always had great luck and satisfaction with the first three, not so great luck with the last. just my experiences, though. ESR, PM sent.

camarodave98

iTrader: (2)

Hpe..

BigBronco

iTrader: (2)

You can not go wrong with any shop listed in this thread.

They are all sponsors so you can find their website on the right ---->

Mike TexaSS

iTrader: (2)

Give us a call or just swing by!