01RedT/A

Well, i went to G10 in atlanta (3rd year in a row) and i decided to go down to the dyno lab and get some numbers. i never had a chance to get baseline numbers but my current mods are in my sig and up to date. i was happy to see that i put down 376.8 hp and 364 ft-lbs even. It was hot as hell, ( around 85 degrees) and the humidity was at least 75%. I dont know what the baro. pressure was, but it had been acting like it was gonna rain all day so probably low. What do you guys think?? What should i expect to gain if i picked up a fast intake, and a decent tune? would i break 400 whp? thats my goal before i go s.c.!!!

Ben01C5

With the size of your cam, I don't think the FAST will help much. It should help, after the S/C goes on.

prostock_bigblock

iTrader: (11)

with a 228-236 duaration cam range u possibly dont need the fast if your goal is 400rwhp.

01RedT/A

im really not looking to crack into the motor again anytime soon. im happy with the cam and the bump its given me. im not looking to go to the extreme with this motor, just put together the parts that i want, and get the most out of the combination that i can.

streetwarrior96

good numbers man

03 BUSA

iTrader: (25)

Nice!

MAXIMO

iTrader: (14)

You dont need a fast to crack the 400+ hp range if you are looking not to crack into the motor just add a 100 shot n20 on it.