sh33p4u

iTrader: (5)

Well, I just finished up the install on my Torquer v2 cam. I also installed Patriot "Gold" Dual Valve Springs and TSP Hardened chromoly pushrods. This video is of it untuned and only idleing by the throttle body set screw. Post comments if you want.

The exhaust is pacesetter headers with basically open cutouts after the collector.

Thanks guys for all the help with the install!

Oh yeah, here is link

silver98formula

iTrader: (3)

Sounds good.

Mr. Bungle

iTrader: (13)

Awesome. That is the exact same cam I just bought the wife with some AFR 205's!

Slow00ls1T/a

what lsa and what rpm was it idling at

Bill Bowling

iTrader: (6)

Good luck. I installed the torquer v1 cam over a year ago. I made 401.2 HP with 374 TQ.

Bill

sh33p4u

iTrader: (5)

it's the 112 lsa and it looks as though the rpm was about 900 according to the stock tach, but that was just with the set screw on the throttle body.

thanks for the compliments!

RoastEmSS

cant wait to get mine in... thats sounds like a beast

tsench

iTrader: (15)

that sound like popcorn is poping nice

Spinmonster

Were the heads milled or are there thinner gaskets?

sh33p4u

iTrader: (5)

Nope, the heads are untouched.. never came off the car.