Converter Problems??
#1
Teching In
Thread Starter
Join Date: Mar 2006
Location: EDINBURG, TX.
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Converter Problems??
Tell Me What You All Think Heres The Deal. Lt1 , H/c, Vigilantie 3,000 , 1 3/4 HEADERS, DUAL EXHAUST, 3:73 And All The Boltons. K Car Ran A 12.3 First Time I Took It To The Track. Then Next Time I Go With Some Wieght Reduction Hopeing To Get Into The High 11s But The Car Goes 12.8 All Night Long With A 1.9 60 Ft. What You All Think ?
#3
Teching In
Thread Starter
Join Date: Mar 2006
Location: EDINBURG, TX.
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
well weather was the same it hardley ever changes around here. track prep im assuming was the same cause its been two weeks in a row i took it out there and same results. and car was given a tune up about 3 weeks ago with new plugs, wires, even distributor and cap and rotor. i used to cut 1.7 when the car was all bolt-on. and 1.6 on the spray and boltons. ive had the stall for a while and its taken a beating im guessing it just gave out. ??