90mm vett tb in SSR w/LS2 ?
06-12-2006, 10:54 PM
#1
Teching In
Thread Starter
Join Date: Jun 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
90mm vett tb in SSR w/LS2 ? The stock TB in the SSr is only 85mm, Installed the 90mm from the vett/gto to see if it would help when S/C was installed. Scan with HP tuners showed 100% ETC Position but it was only opening about 80%.(the stock tb scans 100% and is fully open) No error codes or light, runs great but not 100%. Anybody have any idea on what can be changed to correct it? Thanks, Ross
