Budget Rebuild? (but more to it.... )
#1
On The Tree
Thread Starter
iTrader: (9)
Join Date: Nov 2005
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Budget Rebuild? (but more to it.... )
Ok, long story short, I have a head gasket leak so at the very least I need to change my head gaskets and mill the heads. I'm putting an STS turbo on this car too, so I'm thinking I may just pull the whole motor, freshen it up as it's got 130k on this motor, and then put it back in. I have about a $2000 budget. What can be done?
Is that enough money to swap the cam, mill the heads, and get new bearings and some machine work to the block? Considering I do the labor of the pulling of the motor?
And I only wanna run about 5-8 pounds with the sts, nothing too extreme...
thanks for any help!
Is that enough money to swap the cam, mill the heads, and get new bearings and some machine work to the block? Considering I do the labor of the pulling of the motor?
And I only wanna run about 5-8 pounds with the sts, nothing too extreme...
thanks for any help!