FS:T56 Swap For real this time :)
07-03-2006, 05:04 PM
#1
9 Second Club
Thread Starter
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
FS:T56 Swap For real this time :) Included parts:
Ls1 T-56 transmission- 57K miles- no problems at all. Rebuilt with less than 500 miles on it. Also has the 3&4 steel shift fork with other upgrades I got from D&D. Redline d4 is what I use in this tranny.
Ls1 M6 bellhousing
Ls1 M6 pedal assembly
Ls1 transmission crossmember
Ls1 M6 steel driveshaft
Pro 5.0 shifter w/ cut stick
Flameball red/pearl
Stock boot. Retainer clip is broke. I know where to get one from.
McLeod adjustable master cylinder
Spec stage 3F. In decent condition. I will post pics later. It has 1k on it. I replaced the clutch before I had the transmission rebuilt. Holds fine at 650 + rwhp. I had a slave bolt back out and it made a mess inside there so the pressure plate has scars. But there is no problems with the setup.
Nothing is wrong with anything listed above. I used only the best parts.
I am going to a 4l80 setup and want to see if anyone is interested in this. I am located in San Antonio Texas. I will even let the person drive my car as proof there is nothing wrong before I pull it. I dont want to ship this but if the person interested wants it bad enuff they can arrange for pickup and I will put it on a pallet and secure it and put all the extra parts in a box on the pallet. I would like to get 1,600 + shipping. Thanks
Joe M
I will not part out any of this. So please dont ask.
Ls1 T-56 transmission- 57K miles- no problems at all. Rebuilt with less than 500 miles on it. Also has the 3&4 steel shift fork with other upgrades I got from D&D. Redline d4 is what I use in this tranny.
Ls1 M6 bellhousing
Ls1 M6 pedal assembly
Ls1 transmission crossmember
Ls1 M6 steel driveshaft
Pro 5.0 shifter w/ cut stick
Flameball red/pearl
Stock boot. Retainer clip is broke. I know where to get one from.
McLeod adjustable master cylinder
Spec stage 3F. In decent condition. I will post pics later. It has 1k on it. I replaced the clutch before I had the transmission rebuilt. Holds fine at 650 + rwhp. I had a slave bolt back out and it made a mess inside there so the pressure plate has scars. But there is no problems with the setup.
Nothing is wrong with anything listed above. I used only the best parts.
I am going to a 4l80 setup and want to see if anyone is interested in this. I am located in San Antonio Texas. I will even let the person drive my car as proof there is nothing wrong before I pull it. I dont want to ship this but if the person interested wants it bad enuff they can arrange for pickup and I will put it on a pallet and secure it and put all the extra parts in a box on the pallet. I would like to get 1,600 + shipping. Thanks
Joe M
I will not part out any of this. So please dont ask.
07-05-2006, 06:55 PM
#5
Originally Posted by JMBLOWNWS6
Included parts:
I will even let the person drive my car as proof there is nothing wrong before I pull it. I dont want to ship this but if the person interested wants it bad enuff they can arrange for pickup and I will put it on a pallet and secure it and put all the extra parts in a box on the pallet. I would like to get 1,600 + shipping. Thanks
Joe M
I will not part out any of this. So please dont ask.
I will even let the person drive my car as proof there is nothing wrong before I pull it. I dont want to ship this but if the person interested wants it bad enuff they can arrange for pickup and I will put it on a pallet and secure it and put all the extra parts in a box on the pallet. I would like to get 1,600 + shipping. Thanks
Joe M
I will not part out any of this. So please dont ask.
I still need a test drive before you pull it ....
will you sell just the spec and the pro 5.0
