just1news6

i recently installed a water air separator one of the ones you use for air tools on my car. i have driven the car for fifty or so miles with this thing on and it is already 1/8 full is this normal??? what would cause this i didnt know that much oil could go through that pcv this is crazy

Lethal_Ws6

iTrader: (13)

yea i had a AMW, and mine would be full within 3 days of just around the town driving.. So i sold mine, im going to just delete my pcv 100% , with caps and a metco breather

Quik

iTrader: (7)

damm i use the same as you from cambells houese and with 3k on the clock its only partial with oil nothing like what your saying

viewsonic

JEEZ. I empty mine every oil change. And It only has about a tablespoon worth of oil in there....

bene

iTrader: (16)

Mine works, I have campbell too. I have NO oil in the intake. I'm contemplating on keeping it or go to breather route. I already have the breather, caps...hmmm.

GuitsBoy

iTrader: (4)

im running the air compressor seperator and it gets to teh bottom of the filter element and never raises or lowers. If i drain it, it fills back up to the bottom of the filter element and stays there. I guess its still allowing a little bit of oil into the intake, but hopefully not in big drops anymore.

LS6 valley cover, upright pcv, air water seperator.