victor jr ?'s
#1
10 Second Club
Thread Starter
iTrader: (17)
Join Date: Feb 2005
Location: Belton, TX
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
victor jr ?'s
hey guys im fixing to buy a victor jr. intake but what all do i need to make it work properly? like fuel rails, what kind of throttle body, spacers, will it fit under the stock camaro hood, and just anything yall can think of to make this install go simple, and maybe post some pics and part numbers, thanks guys
#2
11 Second Club
iTrader: (19)
Join Date: Dec 2004
Location: houston, tx
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
hey thomas.. whats up
i was planning on doing this in the near future .. i was going to get this intake from summit that includes the fuel rails
http://store.summitracing.com/partde...5&autoview=sku
then i was going to either get the elbow that nitrous daves makes, it has nitrous spray bars already integrated into the elbow.. most of the other 90-degree elbows you have to hack up the cowl but this one you dont.. or you i was going to get one from http://intakeelbows.com they also have ones made for ls1s but still requires some trimming i think, or you can email them and get a cusom one made with no trimming needed
nitro daves intake
https://ls1tech.com/forums/nitrous-oxide/404043-nitrous-outlet-ls1-intake-system.html
then probably the nick williams 90mm throttle body
oh and you might want to read this article on tpis.com.. this is article made me want this setup instead of the lsx 90/90
http://www.tpis.com/plog/index.php?o...Id=14&blogId=1
oh and you should stop by sometime i wanted to see your exhaust since you got it done.. im probably going to go up to jcs to get my y-pipe built soon if yours looks good
i was planning on doing this in the near future .. i was going to get this intake from summit that includes the fuel rails
http://store.summitracing.com/partde...5&autoview=sku
then i was going to either get the elbow that nitrous daves makes, it has nitrous spray bars already integrated into the elbow.. most of the other 90-degree elbows you have to hack up the cowl but this one you dont.. or you i was going to get one from http://intakeelbows.com they also have ones made for ls1s but still requires some trimming i think, or you can email them and get a cusom one made with no trimming needed
nitro daves intake
https://ls1tech.com/forums/nitrous-oxide/404043-nitrous-outlet-ls1-intake-system.html
then probably the nick williams 90mm throttle body
oh and you might want to read this article on tpis.com.. this is article made me want this setup instead of the lsx 90/90
http://www.tpis.com/plog/index.php?o...Id=14&blogId=1
oh and you should stop by sometime i wanted to see your exhaust since you got it done.. im probably going to go up to jcs to get my y-pipe built soon if yours looks good
#3
10 Second Club
Thread Starter
iTrader: (17)
Join Date: Feb 2005
Location: Belton, TX
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
tommy whats goin on? i hear big plans for the hawk like maybe that big *** ms4 lol. but thanks for the help man ive been comparing this set up to the lsx 90/90. but yeah my exhaust is just clean and simple, nothing radical, but just give me a call and we could meet up or somethin. thanks again