Sealant/epoxy for fuel (metal to plastic)
#1
9 Second Club
Thread Starter
iTrader: (10)
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Sealant/epoxy for fuel (metal to plastic)
Hey guys been battling this fuel pressure issue with new 255 walbro. I am real close to where I need to be, I have gone as far as putting 2 hose clamps on the plastic hose from the pump to the fuel line supply in the tank. I am still down about 4/5psi is there any kind of epoxy/sealant I can put on the connection from the plastic to metal tube/inside the fuel tank. It will always be submerged in fuel. I am so close to being done!!!!!! Been pulling my hair out. Thanks Guys