mullet_mobile

iTrader: (4)

Has anyone mounted a F1 or simular blower on an LS1 with outany of the accy's? I am asking as I will only need an alternator and was wondering if anyone has done this before. If so, was it a kit or a DIY thing?

Thanks.

Urban Legend

iTrader: (5)

Bob at EPP has all of your answers. The link below should help out some.

https://ls1tech.com/forums/forced-induction/573425-f1-procharger.html

mullet_mobile

iTrader: (4)

Thanks. Any way of getting a hold of bob? This is going in a first gen camaro, so mounting it up is prefered rather than down low like a 4th gen.

Thanks again.

EPP

iTrader: (22)

260 244-4808 is my number. Take a look in the project car section at where the unit is located in the '04 GTO, the LS1 Maxda RX7, and the CTS-V. Would that location work on your 1st gen? We start with the GTO ProCharger kit for the CTS-V, and then modify practically every portion of it. This location should keep the blower up out of your 1st gen's suspension. Bob