Cam help
#1
11 Second Club
Thread Starter
iTrader: (8)
Join Date: Aug 2002
Location: Houston/Austin/Ft. Worth
Posts: 1,453
Likes: 0
Received 1 Like
on
1 Post
Cam help
I currently have a heads cam ls1. The heads are CNCed then hand ported LS6 heads and the cam is a 2002 LS6. The car has all supporting bolt-ons and a 12 bolt with 4.10 gears. With the current setup the car made 400rwhp, and 390rwtq. The new cam that I'm putting in the car is a custom grind .228, .232, .595, .610 on a 117 lsa +4, extreme ramp rates. What kind of power gain will I be looking at?
Thomas
as a side note the heads flow I 321 @ .6 and E 240 or 250 @ .6 as well
Thomas
as a side note the heads flow I 321 @ .6 and E 240 or 250 @ .6 as well
#4
11 Second Club
Thread Starter
iTrader: (8)
Join Date: Aug 2002
Location: Houston/Austin/Ft. Worth
Posts: 1,453
Likes: 0
Received 1 Like
on
1 Post
Yeah i'll let yall know how it turns out. Before the heads were hand ported they did not flow near as well. The set-up had a cam in it before, but it was smaller and it made 435rwhp, 410rwtq. So, I'm hoping for around 450rwhp, but we will see.
Thomas
Thomas
#5
11 Second Club
Thread Starter
iTrader: (8)
Join Date: Aug 2002
Location: Houston/Austin/Ft. Worth
Posts: 1,453
Likes: 0
Received 1 Like
on
1 Post
well a problem came up, my car is down at least 1 cylinder maybe more. As soon as that is fixed the cam will be going in.
Thomas
Thomas
Last edited by 1LSWON; 09-14-2006 at 03:43 PM. Reason: I B DUMB
Trending Topics
#9
11 Second Club
Thread Starter
iTrader: (8)
Join Date: Aug 2002
Location: Houston/Austin/Ft. Worth
Posts: 1,453
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by SSilverSSurfer
you goin supercharger?
Thomas