Which heads, any gains ???
09-22-2006, 07:04 PM
#1
9 Second Club
Thread Starter
Which heads, any gains ??? Im currently using a pair of Edelbrock 215cc heads, as CNC'd by West Coast racing.
flow data here.
I was having a nosey over in the other sections and seen Trickflow's offerings.
http://www.trickflow.com/product/che...s1_airflow.asp
Obviously at 382ci, I'm on stock bore size. My cam lift is circa 590/580 in/Ex
Would upgrading to different heads, offer worthwhile benefits ??
Cost is an issue, but I should be able to sell my current Edelbrock units ok.
flow data here.
WCCH/Edelbrock 215 LS1 Flow Data @ 28" Water:
Valve Lift Intake Exhaust
.100" 67.6 55.8
.200" 138.0 121.3
.300" 207.2 170.8
.400" 256.6 207.2
.500" 291.1 226.9
.550" 302.3 230.0
.575" 305.1 231.1
.600" 307.5 232.5
.625" 310.7 233.7
.650" 310.7 236.0
Intake runner volume = 212cc
Exhaust runner volume = 82cc
Combustion chamber volume = 66cc
Test bore = 4.030"
Intake port tested with radius flow plate
Exhaust tested with stub pipe
Valve Lift Intake Exhaust
.100" 67.6 55.8
.200" 138.0 121.3
.300" 207.2 170.8
.400" 256.6 207.2
.500" 291.1 226.9
.550" 302.3 230.0
.575" 305.1 231.1
.600" 307.5 232.5
.625" 310.7 233.7
.650" 310.7 236.0
Intake runner volume = 212cc
Exhaust runner volume = 82cc
Combustion chamber volume = 66cc
Test bore = 4.030"
Intake port tested with radius flow plate
Exhaust tested with stub pipe
I was having a nosey over in the other sections and seen Trickflow's offerings.
http://www.trickflow.com/product/che...s1_airflow.asp
Obviously at 382ci, I'm on stock bore size. My cam lift is circa 590/580 in/Ex
Would upgrading to different heads, offer worthwhile benefits ??
Cost is an issue, but I should be able to sell my current Edelbrock units ok.
Last edited by stevieturbo; 09-22-2006 at 07:18 PM.
