MAF, rad, fender, bolts, elbow, pcm, mounts (all LT1)
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
MAF, rad, fender, bolts, elbow, pcm, mounts (all LT1)
I need a mystic teal drivers side fender for a trans am
Stock MAF for a lt1 untouched
Aftermarket elbow. Preferably ceramic or chrome
2 engine mounts and 1 transmission mount and bracket that surrounds the mount if there is one.
OBDI PCM
Aftermarket Radiator - does not need the trans cooler area
electric fans for the radiator
I need for a lt1 car:
M6 crossmember bolts
th400 bellhousing bolts or studs
Stock MAF for a lt1 untouched
Aftermarket elbow. Preferably ceramic or chrome
2 engine mounts and 1 transmission mount and bracket that surrounds the mount if there is one.
OBDI PCM
Aftermarket Radiator - does not need the trans cooler area
electric fans for the radiator
I need for a lt1 car:
M6 crossmember bolts
th400 bellhousing bolts or studs
#3
[QUOTE=LenT1;5621667]I need a mystic teal drivers side fender for a trans am
Stock MAF for a lt1 untouched
Aftermarket elbow. Preferably ceramic or chrome
2 engine mounts and 1 transmission mount and bracket that surrounds the mount if there is one.
OBDI PCM
Aftermarket Radiator - does not need the trans cooler area
electric fans for the radiator
I need for a lt1 car:
M6 crossmember bolts
th400 bellhousing bolts or studs[/QUOTE
Stock MAF for a lt1 untouched
Aftermarket elbow. Preferably ceramic or chrome
2 engine mounts and 1 transmission mount and bracket that surrounds the mount if there is one.
OBDI PCM
Aftermarket Radiator - does not need the trans cooler area
electric fans for the radiator
I need for a lt1 car:
M6 crossmember bolts
th400 bellhousing bolts or studs[/QUOTE
Last edited by gcouse7; 03-20-2009 at 05:58 AM.