how hard is it to install a cam?
10-03-2006, 11:22 AM
#2
http://www.ls1howto.com/index.php?article=23
Go to the internal section and do some searches for the questions you have, they've all been answered several times. Nothing beats the sound of a cammed ls1 thumping at idle!
Go to the internal section and do some searches for the questions you have, they've all been answered several times. Nothing beats the sound of a cammed ls1 thumping at idle!
10-03-2006, 11:42 AM
#3
The TTP v3 is a great camshaft, but if this is your first time working on your car I wouldnt start with a cam install. Although its not super difficult, it takes a while and you need to know what your doing. I did my buddies with him but when it came down to doing mine i got such a good deal on the installation costs that I had Dez Racing do it along with the dyno tune. Just be patient and double and triple check your work.
10-03-2006, 10:46 PM
#6
TECH Enthusiast
iTrader: (4)
Join Date: Jan 2006
Location: Oklahoma City, OK
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jmm98LS1
http://www.ls1howto.com/index.php?article=23
Go to the internal section and do some searches for the questions you have, they've all been answered several times. Nothing beats the sound of a cammed ls1 thumping at idle!
Go to the internal section and do some searches for the questions you have, they've all been answered several times. Nothing beats the sound of a cammed ls1 thumping at idle!
10-03-2006, 10:52 PM
#7
yea if this is your first cam install, id have someone else do it and watch maybe give them a hand because theres alot involved and theres things that if you havent done it before....you wont think about....so just get some help and learn the right way
