help! driveshaft won't go in....
10-10-2006, 08:08 PM
#1
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
help! driveshaft won't go in.... i don't know what the problem is. me and TRMN8R traded trans set ups th400/t56 and he sent me a stock steel d/s. the yolk is not rusted or anything bad. it goes in about 2-3" fine then its like it hits something, but i cant see anything. i can force it in there a little with my hands but won't go all the way in and its a pain to get out.....
any suggestions?
any suggestions?
10-10-2006, 09:07 PM
#4
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
yea i've tried everything i know of. i have done this a million times 
but never had this problem before. about the only thing i know to do is take the tail housing off the trans and see if anything is fubared. the bushing looks to be in good shape looking in at it :dunno:
but never had this problem before. about the only thing i know to do is take the tail housing off the trans and see if anything is fubared. the bushing looks to be in good shape looking in at it :dunno:
10-10-2006, 09:46 PM
#5
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
yea i've tried everything i know of. i have done this a million times but never had this problem before. about the only thing i know to do is take the tail housing off the trans and see if anything is fubared. the bushing looks to be in good shape looking in at it :dunno:
but never had this problem before. about the only thing i know to do is take the tail housing off the trans and see if anything is fubared. the bushing looks to be in good shape looking in at it :dunno: