Looks like I will have to pull it all the way apart to see what happened.
10-22-2006, 11:23 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I will have to pull it all the way apart to see what happened. see here https://ls1tech.com/forums/drag-racing-results/596074-not-post-i-wanted-make.html
Pulled the plugs and the valve covers no signs of physical damage.
Radiator is way down and oil level is way up but no milk shake. Very small trail of coolant leaked out on to the trailer over night from under the oil pan.
#6 plug was wet with what was probably coolant all the rest look good.
2 ft breaker bar will not turn it over either direction.
I'll get it apart in a few weeks to see what really happened but it does not look good for my pocket book.
Pulled the plugs and the valve covers no signs of physical damage.
Radiator is way down and oil level is way up but no milk shake. Very small trail of coolant leaked out on to the trailer over night from under the oil pan.
#6 plug was wet with what was probably coolant all the rest look good.
2 ft breaker bar will not turn it over either direction.
I'll get it apart in a few weeks to see what really happened but it does not look good for my pocket book.
