Pacesetter Shorties & Custom Y-Pipe (Norcal) F/S!
11-11-2006, 04:21 PM
#1
TECH Addict
Thread Starter
iTrader: (6)
Join Date: Jun 2005
Location: Ft. Bragg, NC
Posts: 2,210
Likes: 0
Received 0 Likes
on
0 Posts
Pacesetter Shorties & Custom Y-Pipe (Norcal) F/S! - '98~'00 Coated Pacesetter Shorties (AIR/EGR) Fittings SOLD
- Custom Y-Pipe (w/O2 bungs) with Random Tech Hi-Flow Cats and SLP Loudmouth Resonator dumped
STILL AVALIBLE
Would prefer to sell them together as the passenger side header flange cone/bolt patter matches the Y-Pipe flange
$300 for both
Only pickup or can arrange to meet up if needed
Located in Los Altos, Ca (So. Bay Area)
Pacesetter Shorties
Y-Pipe
- Custom Y-Pipe (w/O2 bungs) with Random Tech Hi-Flow Cats and SLP Loudmouth Resonator dumped
STILL AVALIBLE
Would prefer to sell them together as the passenger side header flange cone/bolt patter matches the Y-Pipe flange
$300 for both
Only pickup or can arrange to meet up if needed
Located in Los Altos, Ca (So. Bay Area)
Pacesetter Shorties
Y-Pipe
Last edited by RrCoX22; 12-17-2006 at 11:46 PM.
12-17-2006, 12:29 PM
#6
Teching In
Join Date: Jul 2006
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
If your willing to separate I'm interested in the shorties. I'm not to far from you so I can pick it up. Thanks.
Last edited by bay_Z; 12-17-2006 at 12:31 PM. Reason: forgot to say I'll pick up
12-17-2006, 11:40 PM
#7
TECH Addict
Thread Starter
iTrader: (6)
Join Date: Jun 2005
Location: Ft. Bragg, NC
Posts: 2,210
Likes: 0
Received 0 Likes
on
0 Posts
I sold the shorties.....
I will let the custom y-pipe go for $175.00 and prefer for a pick-up as I don't always have access to a vechicle to haul this, if anyones interested
the passenger side flange will need to be changed to a 3-bolt/triangle flange as it's a cone-flange right now... to bolt up to shorties or stock manifolds (simple job for any exhaust shop or exhaust fabist)
I will let the custom y-pipe go for $175.00 and prefer for a pick-up as I don't always have access to a vechicle to haul this, if anyones interested
the passenger side flange will need to be changed to a 3-bolt/triangle flange as it's a cone-flange right now... to bolt up to shorties or stock manifolds (simple job for any exhaust shop or exhaust fabist)