Drag Racing Tech - 5pt Harness with stock Camaro leather seats???

Like This
http://www.ls1tech.com/forums/attachment.php?attachmentid=72298


Does anyone know where these were made?? Or a "write up" or "how to" on how to do this yourself???

Any info would help, i just got some leather camaro seats. After three years , then a month later got the 6pt bar and dont want to have to ditch the seats for a race seat.

Like This
http://www.ls1tech.com/forums/attachment.php?attachmentid=72298


Does anyone know where these were made?? Or a "write up" or "how to" on how to do this yourself???

Any info would help, i just got some leather camaro seats. After three years , then a month later got the 6pt bar and dont want to have to ditch the seats for a race seat.
any decent upholestry shop should be able to do it,,we have it done all the time, bob :)

any decent upholestry shop should be able to do it,,we have it done all the time, bob :)



+1 :secret:

any decent upholestry shop should be able to do it,,we have it done all the time, bob :)

O, well lets see some more pics then

I dont know if I would do that, I did consider doing it. The reason being if you ever DO have a wreck there is no support in that seat to hold the belts up, in other words the belts would tear the seat until the angle became a straight pull to where they are mounted to the bar..this is very bad, this loosens the belts, in a rollover situation it will beat you to death in the seat, there is no lateral support in that seat either, A Trans Am seat is a better choice, an aftermarket seat is better, here are mine $470 shipped to the door.You have to get seat mounts, I got Corbeau mounts off of E Bay and fabbed em to work with sliders.


http://ls1tech.com/forums/showthread.php?t=554678&highlight=interior


David

470 is that for one?

470 is that for one?


Both seats, with rails AND shipping..or it was last time I checked.


David