Another Berger emblem question...
#1
Another Berger emblem question...
Ok, I changed this:
to this (bad pic but it's my most recent, my car is on the right):
...here's another pic before I put it back on the car:
In case you can't tell I painted the panel slightly darker, ditched the Bowtie and Z28 emblem...
I DEFINETLY like it better than with the old emblems on it but am still thinking it's a little too plain with nothing back there...
My favorite Berger panels are ones that have emblems on them but that are balanced...
Ones with the GMMG logo to the left under CAMARO with "by Berger" to the right under CAMARO (took me a friggin hour to find a pic of this):
...or ones that have the stock emblems under the tail light on the right and another emblem under the tail light on the left. Here's some examples:
I want to add emblems to my panel but I have a couple of dilemmas...
1) I have 1974 style Z28 emblems on the side (so I can't put 4th Gen style ones on the back) and it (the 1974 style) looks dumb on the back...
2) I don't have a chambered exhaust (and won't since I love my Mufflex) so a GMMG emblem is out...
I do have a lot of SLP parts on my car and a lot of GM parts (BESIDES the ones that came on it stock...ex. Z06 wheels, SS spoiler, vintage emblems, etc...) So I was thinking about the SLP emblem on the driver side under the tail light:
...and maybe the GM Performance Division emblem on the passenger side under the tail light:
...or there is also this GM Performance Parts emblem to consider:
The Sunoco Cowl hood I have will be getting "346" emblems on the side of the cowl like this (but black letters outline w/ chrome instead of white):
...so I could also throw another "346" under the driver side tail light with some other type of emblem under the passenger side tail light...
I've also tossed around the idea of finding a Sunoco emblem (since I have the hood) like this (but a metal emblem):
...or a V-Flag (yes, old school Camaros, not just Vettes or Chevelles, came with these as well):
...and of course you could always throw the new GM Mark of Excellence emblems into the mix:
Finally, another board member posted this:
Apparently you can get the Dick Harrell emblem from here, wait, not sure if they're a sponsor (moderators have let me slide a LOT on this issue and I don't want to push it) so I'll just post a pic of what it looks like for sale for $50 from their website:
I think this is a GREAT substitution for the GMMG emblem that goes on Berger panels...
My thoughts are that since I have the Sunoco hood which is designed from the Dick Harrell Camaros I should be ok with this one emblem...
Here's a pic of my car with the Sunoco hood for reference:
Just another option...
What do you guys think my best option (besides leaving it blank) would be?
Thanks !
to this (bad pic but it's my most recent, my car is on the right):
...here's another pic before I put it back on the car:
In case you can't tell I painted the panel slightly darker, ditched the Bowtie and Z28 emblem...
I DEFINETLY like it better than with the old emblems on it but am still thinking it's a little too plain with nothing back there...
My favorite Berger panels are ones that have emblems on them but that are balanced...
Ones with the GMMG logo to the left under CAMARO with "by Berger" to the right under CAMARO (took me a friggin hour to find a pic of this):
...or ones that have the stock emblems under the tail light on the right and another emblem under the tail light on the left. Here's some examples:
I want to add emblems to my panel but I have a couple of dilemmas...
1) I have 1974 style Z28 emblems on the side (so I can't put 4th Gen style ones on the back) and it (the 1974 style) looks dumb on the back...
2) I don't have a chambered exhaust (and won't since I love my Mufflex) so a GMMG emblem is out...
I do have a lot of SLP parts on my car and a lot of GM parts (BESIDES the ones that came on it stock...ex. Z06 wheels, SS spoiler, vintage emblems, etc...) So I was thinking about the SLP emblem on the driver side under the tail light:
...and maybe the GM Performance Division emblem on the passenger side under the tail light:
...or there is also this GM Performance Parts emblem to consider:
The Sunoco Cowl hood I have will be getting "346" emblems on the side of the cowl like this (but black letters outline w/ chrome instead of white):
...so I could also throw another "346" under the driver side tail light with some other type of emblem under the passenger side tail light...
I've also tossed around the idea of finding a Sunoco emblem (since I have the hood) like this (but a metal emblem):
...or a V-Flag (yes, old school Camaros, not just Vettes or Chevelles, came with these as well):
...and of course you could always throw the new GM Mark of Excellence emblems into the mix:
Finally, another board member posted this:
Apparently you can get the Dick Harrell emblem from here, wait, not sure if they're a sponsor (moderators have let me slide a LOT on this issue and I don't want to push it) so I'll just post a pic of what it looks like for sale for $50 from their website:
I think this is a GREAT substitution for the GMMG emblem that goes on Berger panels...
My thoughts are that since I have the Sunoco hood which is designed from the Dick Harrell Camaros I should be ok with this one emblem...
Here's a pic of my car with the Sunoco hood for reference:
Just another option...
What do you guys think my best option (besides leaving it blank) would be?
Thanks !
Last edited by 6LITEREATER; 12-19-2006 at 11:34 PM.
#3
TECH Regular
The performance one would look cool. But those badges come stock under the hood above the drivers side head light of some of the Poniac Bonivilles. It was on something wierd... I couldnt figure out why it was there.
#4
TECH Fanatic
iTrader: (2)
Join Date: Dec 2003
Location: Central Florida
Posts: 1,136
Likes: 0
Received 0 Likes
on
0 Posts
Here are the stages I did my panel the last one is what I like not too much just enough to make the panel look good
Rear panel plain
Rear panel w/ Red Bowtie, and HP decal
Rear Panel w/ Red bowtie, HP decal, and Camaro letters
Rear panel w/ hi-polished letters, HP decal, and bowtie
Rear panel w/ Hi-polished letters, HP decal, bowtie, and GMMG sticker badge
Rear panel w/ Hi-polished letters, HP decal, bowtie, and metal GMMG badge
Rear panel plain
Rear panel w/ Red Bowtie, and HP decal
Rear Panel w/ Red bowtie, HP decal, and Camaro letters
Rear panel w/ hi-polished letters, HP decal, and bowtie
Rear panel w/ Hi-polished letters, HP decal, bowtie, and GMMG sticker badge
Rear panel w/ Hi-polished letters, HP decal, bowtie, and metal GMMG badge
#6
TECH Fanatic
iTrader: (2)
Join Date: Dec 2003
Location: Central Florida
Posts: 1,136
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DEMONBIRD
How in the heck were you able to get a real metal GMMG badge?!?!
As for yours either HP #'s, the GM Performance Div one looks good (I have that under my hood
#7
TECH Fanatic
iTrader: (6)
Join Date: Mar 2004
Location: Houston
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01pewter2001z28
I have connections
As for yours either HP #'s, the GM Performance Div one looks good (I have that under my hood
As for yours either HP #'s, the GM Performance Div one looks good (I have that under my hood
i have the regular sticker one on there now...
Trending Topics
#10
Originally Posted by zlover129
what is the part number on that GM Performance Division emblem? Also where did you get those tail lights? Or how did you make them?
For the emblem just do a search on ebay...
#14
12 Second Club
iTrader: (2)
makes it tough that you don't want to use the 4th gen Z28 emblem, that kind of anchors the one side and DragonZ makes a nice polished Z28 that works well with the inserts. Anyway, I like the 5.7 for one side and maybe the SLP decal that OrangePeel sells, it looks great back there.
I'm in the same predicament except I have a gloss panel and brushed/satin steel inserts. I'll be using a matching brushed Z28 and an SLP on the other side....will post pics when complete.
I'm in the same predicament except I have a gloss panel and brushed/satin steel inserts. I'll be using a matching brushed Z28 and an SLP on the other side....will post pics when complete.
#16
TECH Apprentice
iTrader: (4)
Join Date: Sep 2005
Location: Fontana, CA.
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
I have the GMMG decal on the left, stainless Camaro inserts, and had the "by Berger" badge on the right (but I got tired of it). Not great pics, but you get the idea.
Where do you guys get the HP decals?
Where do you guys get the HP decals?
#17
Originally Posted by thelastz28
I have the GMMG decal on the left, stainless Camaro inserts, and had the "by Berger" badge on the right (but I got tired of it). Not great pics, but you get the idea.
Where do you guys get the HP decals?
Where do you guys get the HP decals?
#20
I edited the first post (again) to include this:
Another board member posted this:
Apparently you can get the Dick Harrell emblem from here, wait, not sure if they're a sponsor (moderators have let me slide a LOT on this issue and I don't want to push it) so I'll just post a pic of what it looks like for sale for $50 from their website:
I think this is a GREAT substitution for the GMMG emblem that goes on Berger panels...
My thoughts are that since I have the Sunoco hood which is designed from the Dick Harrell Camaros I should be ok with this one emblem...
Just another option...
Another board member posted this:
Apparently you can get the Dick Harrell emblem from here, wait, not sure if they're a sponsor (moderators have let me slide a LOT on this issue and I don't want to push it) so I'll just post a pic of what it looks like for sale for $50 from their website:
I think this is a GREAT substitution for the GMMG emblem that goes on Berger panels...
My thoughts are that since I have the Sunoco hood which is designed from the Dick Harrell Camaros I should be ok with this one emblem...
Just another option...