jessandy1221

i have a 98 Z28 that i recently bought a replacement window motor for. I have helped a friend replace his (3 times) in his 99 Z28, so i thought it wouldnt be a problem to do the swap myself. however, when i took door panel off i wasnt seeing the inside that i had saw in his 99, anyone that could give me some info or tell me where i can get some info on this would be greatly appreciated.

KEE AUDIO

iTrader: (65)

Try this link and see if it helps any: http://shbox.com/page/windowmotor.html
Good luck!!

jessandy1221

oooooooooooooooooh, i'll have to go back and try that drilling the holes in the door to expose the rivets holding the motor to the bracket, that was my dilemma. thanks

autotrix

iTrader: (5)

Extend your new passenger window motor life!