It Runs!!
#1
Teching In
Thread Starter
Join Date: Apr 2006
Location: San Diego
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
It Runs!!
Finally got my camaro started with a LS1 pullout. I ran into a vacuum leak though at the rear of the intake that I ended up taping off with some duct tape. Anybody know a good way to plug this hole off (see pic).
Added videos to my webpage of first few attempts at starting.
http://community.webshots.com/user/cmeyer124
Added videos to my webpage of first few attempts at starting.
http://community.webshots.com/user/cmeyer124
Last edited by 70CamaroRS_LS1; 01-21-2007 at 05:51 PM.
#2
9 Second Club/LS1TECH Sponsor
iTrader: (14)
Yeah, you might want to try plugging that hole with a MAP sensor!
__________________
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
#3
Teching In
Thread Starter
Join Date: Apr 2006
Location: San Diego
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Well, this wouldn't be first time I've done something stupid. The next step will be trying to remember what the hell I did with it.
Thanks for the help.
Thanks for the help.
#4
9 Second Club/LS1TECH Sponsor
iTrader: (14)
Be sure and also look for the gray 3 wire connector that plugs into the sensor.
__________________
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com