Nail2002

iTrader: (2)

I posted this in the Texas section with not much luck. Does anyone have CME with the Borla adjustable cat back? I already have the CME but want to change out the slp muffler. If you have this setup please post some pics or tell me how it worked out.
2002 SS Cam LTs pulley ect

GR33N GoblinM6

iTrader: (14)

dont see how that would work without a lot of fabricating to the stainless steal Borla components..

do you really like the Borla muffler that much?? there are alot of other better systems if you are not sticking with Borla

98redM6

iTrader: (39)

If you're really insist on the Borla I would just buy the muffler. It's probably going to be about $200 alone, but that's a lot better than $750. You can sometimes pick them up for about $300-400 used.

GR33N GoblinM6

iTrader: (14)

Nail2002

iTrader: (2)

It's not just the borla muffler, I know that is an easy swap, but I want the adjustable plates so I can regulate the sound. I don't think any other systems have that?

98redM6

iTrader: (39)

Have a cutout welded in and then get the plates from borla. A cutout is about $30 and the plates from Borla are about $40 last I recall.