Project Hugger Dyno Results w/ dyno sheet
01-28-2003, 09:25 PM
#1
Teching In
Thread Starter
Join Date: Dec 2002
Location: Overlandpark, KS 66213
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Project Hugger Dyno Results w/ dyno sheet -Through hooker catbacks - 414 HP 389 Torque
-Catbacks dropped (no cutout) 417 HP 393 Torque
(says a lot for the Hooker Catbacks)
http://community.webshots.com/photo/...62104080MpuHWk
=============================================
Project Hugger Mods: GTP Stage II 5.7 heads, Comp Cam 228/224, CC push rods, LS6 intake, Jet Hot LT headers, Hooker Catback, off road Y-pipe, ported TB, Katech Oil pump, Rollmaster double roller timing chain, McCloud Twin Disk, ASP underdrive pulley, NGK TR55's with Taylor 10mm wires
<small>[ January 29, 2003, 08:58 AM: Message edited by: rh2772 ]</small>
-Catbacks dropped (no cutout) 417 HP 393 Torque
(says a lot for the Hooker Catbacks)
http://community.webshots.com/photo/...62104080MpuHWk
=============================================
Project Hugger Mods: GTP Stage II 5.7 heads, Comp Cam 228/224, CC push rods, LS6 intake, Jet Hot LT headers, Hooker Catback, off road Y-pipe, ported TB, Katech Oil pump, Rollmaster double roller timing chain, McCloud Twin Disk, ASP underdrive pulley, NGK TR55's with Taylor 10mm wires
<small>[ January 29, 2003, 08:58 AM: Message edited by: rh2772 ]</small>
01-28-2003, 11:37 PM
#4
Re: Project Hugger Dyno Results w/ dyno sheet Congrats man. #s look good. Scan the graph if ya can. I like seeing power under the curve as well as Peak #s. Im in the market for agood set of 5.3s right now and GTP is one of the vendors Im considering.
