ARP head BOLTS. Do I torque then degree the bolts?
04-20-2007, 12:23 PM
#1
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: Arlington, Texas
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
ARP head BOLTS. Do I torque then degree the bolts? Title kind of says it all. I used ARP moly lube and torqued to the specified 70 ft lbs(moly lube specs) and 23 ft lbs on the small bolts. It says "do not follow manufactuers torque specifications" which I dident, I used ARP's specs.. But does that also mean not to use a torque angle gauge and degree the bolts?
Thanks guys.. Other than this and the oil pan and covers the motor is finished!
-Lurius
Thanks guys.. Other than this and the oil pan and covers the motor is finished!
-Lurius
04-20-2007, 01:58 PM
#3
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: Arlington, Texas
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Steve Burger
Nope torque to ARP specs and drink a beer.
-Lurius
