Tea heads n fms cam fs
07-15-2007, 02:45 AM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jan 2005
Location: robstown tx
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Tea heads n fms cam fs --------------------------------------------------------------------------------
TEA Stage 2 5.3 heads for sale w/ low miles.
Heads have 2.02 ferrea valves on the intake side
1.57 on the exhaust
PRC dual springs n seals seat n retainers w/ 1000 miles on them.
Compression was estimated at 10.9-11.1
These heads are milled .015 for the extra compression. $1100 shipped
Brand new in box FMS custom grind- .595-.598 lift 230- 234 duration, 112 LSA - $350 shipped
Im going w/ a cam only w/ nitrous setup\
PM me for quicker response.
http://smg.photobucket.com/albums/v...nt=DSC02847.jpg
http://smg.photobucket.com/albums/v...nt=DSC02853.jpg
http://smg.photobucket.com/albums/v...nt=DSC02846.jpg
http://smg.photobucket.com/albums/v...nt=DSC02848.jpg
http://smg.photobucket.com/albums/v...nt=DSC02850.jpg
TEA Stage 2 5.3 heads for sale w/ low miles.
Heads have 2.02 ferrea valves on the intake side
1.57 on the exhaust
PRC dual springs n seals seat n retainers w/ 1000 miles on them.
Compression was estimated at 10.9-11.1
These heads are milled .015 for the extra compression. $1100 shipped
Brand new in box FMS custom grind- .595-.598 lift 230- 234 duration, 112 LSA - $350 shipped
Im going w/ a cam only w/ nitrous setup\
PM me for quicker response.
http://smg.photobucket.com/albums/v...nt=DSC02847.jpg
http://smg.photobucket.com/albums/v...nt=DSC02853.jpg
http://smg.photobucket.com/albums/v...nt=DSC02846.jpg
http://smg.photobucket.com/albums/v...nt=DSC02848.jpg
http://smg.photobucket.com/albums/v...nt=DSC02850.jpg
Last edited by carreras; 07-16-2007 at 05:30 PM.
07-16-2007, 05:33 PM
#4
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jan 2005
Location: robstown tx
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Pics can be seen on the parts for sale forum. If the heads are sold in texas i can be negotiable on the price. Let me know. The previous owner made 448hp n 405tq w/ a f13 through a 12bolt. They flow 317cfm at .600 out of the box.