How to figure out D1 boost.
#1
How to figure out D1 boost.
I am trying to figure out if there is a way to find out how much boost I will be running with my pulley selection. Is there a formula to figure it out like you can figure out what you are spinning the blower to. I have that one already by the way!
Anyways I am going to be running a d1 with a ati super damper, procharger 7.65 crank pulley and a 3.4 non slip pulley on the blower.
Anyways I am going to be running a d1 with a ati super damper, procharger 7.65 crank pulley and a 3.4 non slip pulley on the blower.
#3
Ok well here is some of the things that you just stated
346
long tubes (edlebrock)
no cats
loudmouth exhaust
comp cam 230/228 .591/.591 114
stock 317 6.0 heads with dual valve springs (prc)
Rpm's up to 7000 with out maxing the blower out
elevation is somewhere around 600 to 1200 with a DA around 2600 most of the time
lets just say around 90 for the temperature.
I wish there was a formula!!!!
346
long tubes (edlebrock)
no cats
loudmouth exhaust
comp cam 230/228 .591/.591 114
stock 317 6.0 heads with dual valve springs (prc)
Rpm's up to 7000 with out maxing the blower out
elevation is somewhere around 600 to 1200 with a DA around 2600 most of the time
lets just say around 90 for the temperature.
I wish there was a formula!!!!