Gentlemen with MTI C2 cam enter here
#1
Teching In
Thread Starter
Join Date: Mar 2003
Location: SOUTH TEXAS
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Gentlemen with MTI C2 cam enter here
What do you think of this cam C2 ( 224/224 .581 .581 114).
Does any one have the c2 on a sound clip I would like to listen to it
Does any one have the c2 on a sound clip I would like to listen to it
#2
10 Second Club
iTrader: (1)
Re: Gentlemen with MTI C2 cam enter here
i have the c1 222/222 112.(i know you asked for c2)the c1 is a great cam.it idles great,i've had no low rpm serging, the car don't shake too bad and it pulls hard to near 7,000rpm's.sorry,i have no sound clip to give(hell i dont even know how to do that).i went with the c1 because it puts less stress on the springs. e-mail raughammer he's had both cams and is a great guy,real helpful.his site has a great cam section with all the info and peoples comments on the cams(c2 also). goodluck to ya
#3
9 Second Club NA
iTrader: (180)
Re: Gentlemen with MTI C2 cam enter here
Dont have a sound clip but I intend to make one soon. I love my cam (C2) and I dont have any problems with it whatsoever. It surges a little bit, but about the same with the stock cam. I think that every manual vehicle does it, just some are worse than others. Im running the Manley valvetrain with the cam. By the way, the C2 comes on a 112 LSA. Here's a link to my thread that I made a while back.
https://ls1tech.com/threads/showflat...amp;PHPSESSID=
Hope this helps.
https://ls1tech.com/threads/showflat...amp;PHPSESSID=
Hope this helps.